Micro Small Diameter Washers
DIN 433
Materials/Finishes:
Steel/Zinc & clear
Stainless steel/Self colour
Brass/Self colour
Note: As there are varying dimensional standards for micro diameter products we recommend you contact your nearest TR location prior to specifying, if head dimensions are critical.
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.
| For screws | M1 | M1.2 | M1.4 | M1.6 | M2 |
| d | 1.1 | 1.3 | 1.5 | 1.7 | 2.2 |
| D | 2.5 | 3 | 3 | 3.5 | 4.5 |
| s | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
Note: As there are varying dimensional standards for micro diameter products we recommend you contact your nearest TR location prior to specifying, if head dimensions are critical.
Select ..
| Preferred size / availability | Part number | Finish | - | Material | Thread | |
Please make a selection from the criteria above | ||||||