Micro Socket Set Screws - Flat Point
DIN 913
Materials/Finishes:
Steel 45H/Self colour
Stainless steel/Self colour
Note: As there are varying dimensional standards for micro diameter products we recommend you contact your nearest TR location prior to specifying, if head dimensions are critical.
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.
| d | M1.4 | M1.6 | M2 | M2.5 |
| Pitch | 0.3 | 0.35 | 0.4 | 0.45 |
| S (key size) | 0.7 | 0.7 | 0.89 | 1.27 |
| t min | 0.6 | 0.7 | 0.8 | 1.2 |
| t max | 1.4 | 1.5 | 1.7 | 2.0 |
Note: As there are varying dimensional standards for micro diameter products we recommend you contact your nearest TR location prior to specifying, if head dimensions are critical.
Select ..
| Preferred size / availability | Part number | Finish | Length | Material | Thread | |
Please make a selection from the criteria above | ||||||