Visit our Investor websiteTR
Screws
Sets, Bolts and StuddingSocket ProductsNutsWashersCable ManagementFasteners to Japanese StandardsBumax® High Strength StainlessSheet Metal FastenersTR Self Locking NutsScrews for PlasticsBrass Inserts for PlasticBlind Rivet NutsBlind RivetsTR Security FastenersMicro-Diameter Fasteners from M0.6CirclipsBonded Seals and O-RingsTinnerman Spring Steel FastenersManufacturing ConsumablesSpecial Manufacture
Overview
Pan Head Tap-Fix Screws - Recess T
For metals
Three-lobed threadform
Materials and Finishes
Case hardened steel/Zinc & clear de-embrittled
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information
Dimension data
| d | M3 | M4 | M5 | M6 |
| D | 6 | 8 | 10 | 12 |
| H | 2.52 | 3.25 | 3.95 | 4.7 |
| Recess - min | 1.68 | 1.9 | 2.64 | 3 |
| Penetration - max | 1.93 | 2.36 | 3.1 | 3.4 |
| Multidrive No. | T10 | T20 | T25 | T30 |
Preferred Lengths: All sizes non-preferred - please enquire for availability
| Technical Support Articles |
| Tap-Fix torque data |
Select ..
Please Login or Register to create enquiries, access our 3d models, drawings and specification sheets
| Preferred size / availability | Part number | Finish | Length | Material | Thread | |
Please make a selection from the criteria above | ||||||