TR Security Machine Screws Type 12
Materials & Finishes
Steel 4.8, Zinc & clear plated
Stainless steel, Self colour
Head diameters (Nominal)
M6 – 10.5mm
M8 – 16.5mm
M10 – 27.5mm
Preferred sizes:
All sizes non-preferred – Please enquire for stock availability
Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information.
Key Features
Universal application, permanent fixing, can be set to any preset torque without risk of stripping drive face. Integrity of performance is not compromised, even if assembly tool is not available. Suitable for automotive, commercial vehicle construction and general engineering / domestic applications. Drivers to suit 1/2sq. drive. Manufactured to order on a short lead basis.
TR Security Drivers
Our range of drivers and drive bits are available from stock but only to bona fide purchasers of TR Security fasteners and can only be purchased separately if fasteners have been previously been supplied.
Please note: Most security screws are not manufactured to DIN or ISO standards and head dimensions can vary considerably from manufacturer to manufacturer. If head dimensions are critical, please specify at time of order.
Select ..
| Preferred size / availability | Part number | Finish | Length | - | Material | Thread | Head style | |
Please make a selection from the criteria above | ||||||||