Visit our Investor website
Overview

Cage Nuts

Materials and Finishes:

Steel/Zinc & Trivalent Plate CR3

Zinc & Yellow CR3 available on request.

Note: Due to the fact that fastening applications differ greatly, the below information is for guidance only and is correct to the best of our knowledge. The customer must satisfy themselves with the performance of the fastener and validity of the data. TR Fastenings will not be held responsible for any failure that may occur from the use of this information. 

Dimension data
Dimensional Data
SizeW mmL mmC mmT mmH mmPanel Range mmPart NumberFinish
M414.2213.726.100.4759.530.7 - 1.6CN-4M-NFTC1D
M414.2213.726.100.4759.531.7 - 2.5CN-4M-WFTC1D
M514.2213.726.100.4759.530.7 - 1.6CN-5M-NFTC1D
M514.2213.726.100.4759.531.7 - 2.5CN-5M-WFTC1D
M514.2213.726.100.4759.532.4 - 3.1CN-5M-NWDTC1D
M614.2213.726.100.4759.530.7 - 1.6CN-6M-NFTC1D
M614.2213.726.100.4759.531.7 - 2.5CN-6M-WFTC1D
M614.2213.726.100.4759.532.4 - 3.1CN-6M-NWDTC1D
M818.0017.807.200.38012.801.0 - 1.7CN-8M-NFTC1D
M818.0017.807.200.38012.801.7 - 2.3CN-8M-WFTC1D
M1018.0017.807.200.38012.801.0 - 1.7CN-10M-NFTC1D
M1018.0017.807.200.38012.801.7 - 2.3CN-10M-WFTC1D
Preferred range
Preferred Range
 Size
M4M5M6M8M10
Panel Range mm0.7 - 1.6STSTST  
1.0 - 1.7   STST
1.7 - 2.3   STST
1.7 - 2.5STSTST  
2.4 - 3.1 STST  

ST - Steel/Zinc & Trivalent Plate CR3

Select ..

0.7-1.61.0-1.71.7-2.31.7-2.52.4-3.1
M10M4M5M6M8
Please Login or Register to create enquiries, access our 3d models, drawings and specification sheets
Part numberPanel RangeSize

Please make a selection from the criteria above